Autonics Photoelectric Sensor, Photoelectric Type BTS30-LDTD Size_005^15 For use on flat surfaces

For use on flat surfaces only

4 ounces Manufacturer Series Number 513 Measurement Accuracy 3 μm Measurement System US Model Number 513-464-10E Number of Items 1 Part Number 513-464-10E Range 0

Specification item model symbol Specification information With auto switch - Without auto switch installation support B Basic type tube material - aluminum tube tube inner diameter 80 Tube inner diameter 80mm Types of port screws - Rc cylinder stroke 75 Cylinder stroke 75mm Cylinder additional symbol - No bellows

75 kA at 440 V AC 50/60 Hz conforming to IEC 60947-2 Suitability for isolation Yes conforming to IEC 60947-2 utilisation category Category A Trip unit name TM-D Trip unit technology Thermal-magnetic Trip unit rating 15 A at 50 °C Protection type Short-circuit protectionOverload protection Pollution degree 3 conforming to IEC 60664-13 conforming to IEC 947-1 Complementary Control type Toggle Mounting mode Fixed mounting support Backplate Upside connection Front downside connection Front Mechanical durability 8500 cycles Electrical durability Category A: 1500 cycles 415 V AC 50/60 Hz conforming to IEC 60947-2 Connection pitch 25 mm local signalling Positive contact indication Neutral protection setting Without protection earth-leakage protection Without height 130 mm Width 75 mm Depth 60 mm Environment Standards JIS C8201-2-2EN/IEC 60947-1GB/T 14048

-  3/8 × 7/16

Autonics Photoelectric Sensor, Photoelectric Type BTS30-LDTD Size_005^15 For use on flat surfacesSensing type Convergent reflective type Sensing distance 5 to 30mm Sensing target Opaque, Translucent material(min. sensing target: 0. 15mm) Light source Red LED(650nm) Response time Max. 1ms Power voltage 12 24VDC 10%(ripple P P: max. 10%) Current consumption Max. 20mA Operation mode Dark ON Control output NPN open collector Connection type Cable type(2. 5, 2m) Environment_Ambient illumination Sunlight: Max. 10,000lx, Incandescent lamp: Max. 3,000lx